Hello members,

I'm looking to purchase a bunch of new Dab Tools at some great wholesale prices! I have to buy quite a few, so I'd like a bit of help! I'm not a dabber, as it's too much for my little girly frame to handle, so I'd like to ask a few questions

1. The Dabber. What's the most common shape of either end? I have seen a Spade, Flat Shovel, Point, Round Scoop.
2. The Carb Cap. What's the most common mm in diameter? I'm guessing 25 - 30mm?
3. Quartz or Titanium. Quartz Banger or Titanium Nail? I think that's the lingo haha
4. Electric Nail. Can you guys give me some good name brand ones that you have found to work well? Maybe something high end and something budget?
5. Dab Mats. You guys use them? If so, what's a fair size? I would guess around a 6" X 6" or so?
6. The Rig. It's tough to get into any bongs or rigs that have any size to them, everything ships Air, so size does matter! I could grab a few smaller ones. Can you give me an idea of height and maybe diameter that might be the smallest to work with?
7. Extract Storage. I have seen all kinds of little silicone containers. Is that something you guys use?

I'm sure some of these questions might make me sound like a ding dong but I'm learning as we go!

Get us some of those heated tip tab tools.. stuff sticking to tools is the biggest gripe I have with dab tools

xsinx wrote: Wed Feb 13, 2019 12:27 pm Get us some of those heated tip tab tools.. stuff sticking to tools is the biggest gripe I have with dab tools

Heated Tip Tab Tools? Can you link me to something?

xsinx wrote: Wed Feb 13, 2019 1:10 pm http://lmgtfy.com/?q=heated+dab+tool

Effing Putin face.

When I was a kid, this was our heated Tip Tab Tool

lol, seriously though, I need to get me one of those

When I was a kid, my dad gave me his soldering iron. You young ones... so spoiled with your tip tab tools. I inhaled 25% Solder 25% Flux and 50% shitty weed.

Now you guys have telescopes... "oooooh, one tricome is on a 34 degree angle. Should I post on Reddit? Do you think they will refund me my whole order and send me Quads?" :p

I'll be on the hunt for the heated tip tab tools and jerkey I guess...

How we used to dab back in '92

King Tuts wrote: Wed Feb 13, 2019 10:40 pm When I was a kid, my dad gave me his soldering iron. You young ones... so spoiled with your tip tab tools. I inhaled 25% Solder 25% Flux and 50% shitty weed.

Now you guys have telescopes... "oooooh, one tricome is on a 34 degree angle. Should I post on Reddit? Do you think they will refund me my whole order and send me Quads?" :p

I'll be on the hunt for the heated tip tab tools and jerkey I guess...

Look at you, mocking our dab tools and macro shots. Not a good look..... I will buy from your company one last time solely for the purpose of reviewing and taking shitty pictures of your shitty weed with my shitty nokia 7650. Thanks KingCunts

I just placed my first order (Order number: 15049) if you have any of the dab tools to throw in that would be wicked, i chose the flower sample as the free gift because none of the other stuff was for shatter anyways.
I have only ever used the tool that came with my Sai.
A mat would def be useful, as i find the wax can get everywhere depending on the consistency.
People say the silicone containers are not good for the wax (something about leaking terps) I tend to keep it in the parchment paper and take out a bit at a time and store it in the little containers.
I only use the Saionara for shatter so i cant weight in on any of the other stuff.
Thanks!

I cringe thinking of the ways i used to consume cannabis when i was a kid lol

darkkingphoenix wrote: Thu Feb 14, 2019 3:23 am I just placed my first order (Order number: 15049) if you have any of the dab tools to throw in that would be wicked, i chose the flower sample as the free gift because none of the other stuff was for shatter anyways.
I have only ever used the tool that came with my Sai.
A mat would def be useful, as i find the wax can get everywhere depending on the consistency.
People say the silicone containers are not good for the wax (something about leaking terps) I tend to keep it in the parchment paper and take out a bit at a time and store it in the little containers.
I only use the Saionara for shatter so i cant weight in on any of the other stuff.
Thanks!

I cringe thinking of the ways i used to consume cannabis when i was a kid lol

Sweet! I threw in a few items to add in the notes I can't recall if we have anymore Dab Mats but if we do, I think you'll see one of those as well!

Once you get them, please let me know what you think and if they work well with your set up. Quite a few people are starting to move to extracts these days and I'd definitely like to carry a few things for them to get started. I guess you know about the Free Gift option @ $99 and these little pieces here and there are perfect for that!

Yeah, let me know once it arrives! Order should be leaving today. We were quite backed up from Monday, we had a very new extremely busy day but I think we should be caught up!

Thanks for the bizz and please, never hesitate to ask for something! If I have it and I can do it, I always will

CrayziesPhalanges wrote: Thu Feb 14, 2019 12:07 am

King Tuts wrote: Wed Feb 13, 2019 10:40 pm When I was a kid, my dad gave me his soldering iron. You young ones... so spoiled with your tip tab tools. I inhaled 25% Solder 25% Flux and 50% shitty weed.

Now you guys have telescopes... "oooooh, one tricome is on a 34 degree angle. Should I post on Reddit? Do you think they will refund me my whole order and send me Quads?" :p

I'll be on the hunt for the heated tip tab tools and jerkey I guess...

Look at you, mocking our dab tools and macro shots. Not a good look..... I will buy from your company one last time solely for the purpose of reviewing and taking shitty pictures of your shitty weed with my shitty nokia 7650. Thanks KingCunts

CraziestP, I mock everything but in all good fun. I see you called me the C word! In England, Australia and places like these, it's a term of endearment! I hope this is the case here, as I'm only having some fun

I googled the phone and was expecting something fancy haha NOT SO MUCH!

- KingC

CrayziesPhalanges wrote: Thu Feb 14, 2019 12:07 am Look at you, mocking our dab tools and macro shots. Not a good look..... I will buy from your company one last time solely for the purpose of reviewing and taking shitty pictures of your shitty weed with my shitty nokia 7650. Thanks KingCunts

man, smoke a fuckin joint and lighten up lol, it's the internet. When you start getting older you think of all the stupid shit you did as a kid, and then you compare it to the even stupider shit the young folks are doing currently. You'll get there one day (not saying the added technology and stuff is stupid, nor calling anything you may be doing stupid. I'm generalizing, please don't take it personally)

Older folks usually take a bit longer to understand new fandangled fads and memes and other things like twerking. I'm somewhere between 30 and 40 and I also shake my head at a lot of things going on today in the world. Brings me back to simpler times in my younger days where people older than I would shake their heads at the things the younger folks did.

Internet needs thicker skin and less entitlement. People so sensitive these days.

I wanna be a cunt too

KingTuts wrote:I googled the phone and was expecting something fancy haha NOT SO MUCH!

Woooooooosh Think the point was missed completely there!

I dunno, I'm confused. I'm note sure if he's pissed or not!

I want to be a part of pitching in for him to get a new phone/camera though haha

Prob Mirkalane's latest alt account, I think he managed to get himself banned again this week.

King Tuts wrote: Thu Feb 14, 2019 11:20 am

CrayziesPhalanges wrote: Thu Feb 14, 2019 12:07 am

King Tuts wrote: Wed Feb 13, 2019 10:40 pm When I was a kid, my dad gave me his soldering iron. You young ones... so spoiled with your tip tab tools. I inhaled 25% Solder 25% Flux and 50% shitty weed.

Now you guys have telescopes... "oooooh, one tricome is on a 34 degree angle. Should I post on Reddit? Do you think they will refund me my whole order and send me Quads?" :p

I'll be on the hunt for the heated tip tab tools and jerkey I guess...

Look at you, mocking our dab tools and macro shots. Not a good look..... I will buy from your company one last time solely for the purpose of reviewing and taking shitty pictures of your shitty weed with my shitty nokia 7650. Thanks KingCunts

CraziestP, I mock everything but in all good fun. I see you called me the C word! In England, Australia and places like these, it's a term of endearment! I hope this is the case here, as I'm only having some fun

I googled the phone and was expecting something fancy haha NOT SO MUCH!

- KingC

Hahaha as a Brit I'm gonna go ahead and say it's not used too much as a term of endearment in the UK, but you're on the right track with the Aussies - it should be their national word. There's nothing more guttural than an angry Brit calling you a fUckin cUnt lmao

King Tuts wrote: Thu Feb 14, 2019 11:58 am I dunno, I'm confused. I'm note sure if he's pissed or not!

I'd opt to say he's pissed. Macro shots of your flower with a shitty old nokia (likely flip?) phone would be potatoe quality AT MOST BESTEST!

He was mocking you as you mocked him; basically in my head he will go out of his way to make his review look terrible (which who knows if that would be done or not).

itsjustasalad wrote: Thu Feb 14, 2019 1:07 pm

King Tuts wrote: Thu Feb 14, 2019 11:58 am I dunno, I'm confused. I'm note sure if he's pissed or not!

I'd opt to say he's pissed. Macro shots of your flower with a shitty old nokia (likely flip?) phone would be potatoe quality AT MOST BESTEST!

He was mocking you as you mocked him; basically in my head he will go out of his way to make his review look terrible (which who knows if that would be done or not).

Ding ding ding we got a winner...Looks like someone has been smoking kingtuts and is sober enough to actually understand what i meant. God you are all sped.

CrayziesPhalanges wrote: Thu Feb 14, 2019 2:04 pm Ding ding ding we got a winner...Looks like someone has been smoking kingtuts and is sober enough to actually understand what i meant. God you are all sped.

Full disclosure, I haven't tried KT's flower yet. I am sober though

CrayziesPhalanges wrote: Thu Feb 14, 2019 2:34 pmFuck you insync youre worse than i am. At least i buy my weed you inbred whippersnapper. Ill be waiting for your next paid review

lol, the fact I can tell it's you by how much of a whack job you are everytime is kind of an eye opener, isn't it? So how high does the Mirka scale go now? Hit 10/5 yet?

Easy easy guys. This community is better than that other one....

I didn't mean any harm in my post, just trying to be witty. Sometimes I'm good at that shit and sometimes I'm not.

If any of you place any orders with me I'll hook you up with any dab tools I presently have, including the fancy eye dab/carb cap on the house its bendy and VERY uncommon. Limited edition, only 7.8 million made in China. Last month.

King Tuts wrote: Thu Feb 14, 2019 11:16 am

darkkingphoenix wrote: Thu Feb 14, 2019 3:23 am I just placed my first order (Order number: 15049) if you have any of the dab tools to throw in that would be wicked, i chose the flower sample as the free gift because none of the other stuff was for shatter anyways.
I have only ever used the tool that came with my Sai.
A mat would def be useful, as i find the wax can get everywhere depending on the consistency.
People say the silicone containers are not good for the wax (something about leaking terps) I tend to keep it in the parchment paper and take out a bit at a time and store it in the little containers.
I only use the Saionara for shatter so i cant weight in on any of the other stuff.
Thanks!

I cringe thinking of the ways i used to consume cannabis when i was a kid lol

Sweet! I threw in a few items to add in the notes I can't recall if we have anymore Dab Mats but if we do, I think you'll see one of those as well!

Once you get them, please let me know what you think and if they work well with your set up. Quite a few people are starting to move to extracts these days and I'd definitely like to carry a few things for them to get started. I guess you know about the Free Gift option @ $99 and these little pieces here and there are perfect for that!

Yeah, let me know once it arrives! Order should be leaving today. We were quite backed up from Monday, we had a very new extremely busy day but I think we should be caught up!

Thanks for the bizz and please, never hesitate to ask for something! If I have it and I can do it, I always will

Sweet thanks! Can't wait to try it out! Extracts are so much more efficient, and clean. Don't reek of weed after you use it either.

This thread went off the rails quick! I thought your joke was funny lol buddy sounds like he enjoys to be a sh*t disturber.

This thread went off the rails quick! I thought your joke was funny lol buddy sounds like he enjoys to be a sh*t disturber.

Maybe he's just having a bad day or didn't know I was just playing... I could keep it more professional here and leave the bad jokes and soft porn in the discord... But that wouldn't be me

King Tuts wrote: Wed Feb 13, 2019 11:55 am Hello members,

I'm looking to purchase a bunch of new Dab Tools at some great wholesale prices! I have to buy quite a few, so I'd like a bit of help! I'm not a dabber, as it's too much for my little girly frame to handle, so I'd like to ask a few questions

1. The Dabber. What's the most common shape of either end? I have seen a Spade, Flat Shovel, Point, Round Scoop.
2. The Carb Cap. What's the most common mm in diameter? I'm guessing 25 - 30mm?
3. Quartz or Titanium. Quartz Banger or Titanium Nail? I think that's the lingo haha
4. Electric Nail. Can you guys give me some good name brand ones that you have found to work well? Maybe something high end and something budget?
5. Dab Mats. You guys use them? If so, what's a fair size? I would guess around a 6" X 6" or so?
6. The Rig. It's tough to get into any bongs or rigs that have any size to them, everything ships Air, so size does matter! I could grab a few smaller ones. Can you give me an idea of height and maybe diameter that might be the smallest to work with?
7. Extract Storage. I have seen all kinds of little silicone containers. Is that something you guys use?

I'm sure some of these questions might make me sound like a ding dong but I'm learning as we go!

Nice to see vendors interacting with the community. As for your questions:

1. Probably Spade or Round scoop. My current tool has both. You want to make sure you get a material that isnting going to give off any vapors when exposed to heat.
2. 20 - 30mm, but it's more dependant on the size of of your banger (most of which are 20-30mm these days)
3. Quartz is generally thought to taste better, while titanium is easier to clean and lasts longer. There are other more exotic materials too (sapphire for example). I'm currently using a liger with obsidian insert.
4. My high5 e-nail has been going strong for a few years now. Fancier ones like the hex nail work with your smart phone and shit. There are lots of shitty and dangerous chinese ones out there so be careful.
5. Bigger the better in my opinion (within reason). Anything from paper sheet to cookie sheet size is good
6. I like medium sized rigs, but if it functions well who cares. What's important is good function and ideally a recycler style rig.
7. Keep extracts in the fridge, out of direct light. Silicone containers do leach terps but maybe a non issue depending on how fast you go through it. Glass jars are the gold standard. You'll see all the higher end extract companies ship in glass jars.

You might want to look at adding battery powered dab rigs to your line-up.
I'm using a Yocan evolve plus with the ceramic donut for my out and about, it's working great.

I've heard great things about the SAI and the molecule as well.

Ridikilous wrote: Tue Feb 19, 2019 3:04 pm You might want to look at adding battery powered dab rigs to your line-up.
I'm using a Yocan evolve plus with the ceramic donut for my out and about, it's working great.

I've heard great things about the SAI and the molecule as well.

Thank you as well AConcernedGrower for you thoughts! I'll definitely be using some ideas

Ridikilous, I think that many do some online shopping for more expensive products and for us to be able to get a half decent wholesale cost, I would have to buy quite a bit. At the moment, our Head Shop supplies don't move quite enough for me to entertain the thought of spending those kinda bucks on some nicer gear! Size is always an issue for shipping too. Once we jump from a small CP bag to a Larger one, it's quite the cost jump as well. I also worry about warranty.

I'm looking for smaller items that are easier to ship and can be added to members arsenal, maybe not the meat and potatoes of it. I think consumers in the industry are quite informed and smart, by the time it's time for a powered rig of some sort. I see consumers chatting about buying stuff from China all the time.

For now I'd like to keep things simple and be able to even give stuff away fro free and easily added to an order, without worrying about extra freight charges and or a warranty. I'll keep the big bucks put aside for the actual extracts! Get great deals on that to pass that along to the consumer. I think if anything an electric nail would be the first more expensive purchase but then again, I'd probably just use it as a Promo to give away haha.

Again, appreciate the feed back, I learn something everyday! The knowledge at this gigantic round table is unlimited

I have dab tools I paid 20 plus dollars for and they were all crap. I have been using the free tool truck screwdrivers and have never looked back.
I know other guys that use these for dabbing and they think they are really good too.

You guys could put you KT logo on these and either sell or give them away with concentrate purchase orders.

lol,I also use a wood chisel to scrape my rosin lol.

xsinx wrote: Tue Mar 05, 2019 8:36 pm lol,I also use a wood chisel to scrape my rosin lol.

Hey why not if it works, it sure beats the heck out of paying for a tool that you shouldn't have bought in the first place.

Chisels, Screw Drivers, Butter Knives... When men were men....